top of page
  • White Facebook Icon
  • White Instagram Icon
bg-1.jpg

Back to Product Support - Saturn V

How to Replace / Reset the Turntable Belt on the Saturn V Jukebox

Update - Dec 2025

If you notice that the turntable is not rotating properly or the playback speed appears unstable, please follow the troubleshooting steps below. In most cases, this issue is caused by the drive belt shifting during transportation or normal use.

Step 1 — Remove the Platter Retaining Clip

 

  1. Use a flat-head screwdriver to remove the retaining clip that secures the platter.

  2. The clip has two grooves on its surface.

  3. Insert the screwdriver into one of the grooves and gently apply pressure against the center spindle to release the clip.

 

⚠ Do not use excessive force.

​

Step 2 — Lift the Platter

 

Carefully lift the platter to check whether the drive belt has slipped off or become misaligned.

​

Step 3 — Reposition the Belt

 

  1. Place the belt back along the underside of the platter.

  2. Ensure the belt sits centered and level around the platter base.

 

Incorrect positioning may cause rotation fluctuation or unstable speed.

​

 

 

Step 4 — Attach the Belt to the Motor Pulley

 

  1. Use one finger to hook the belt from the right side of the platter.

  2. Carefully loop the belt onto the gold motor pulley (shaft).

​

 

​

​

​

​​

​

​

​

​

​

 

Step 5 — Reinstall the Platter

 

After attaching the belt, place the platter back onto the center spindle.

​

​

 

 

Step 6 — Align the Belt

 

Rotate the platter two full turns by hand.

This allows the belt to settle naturally and align evenly underneath.

​

​

 

 

Step 7 — Test Playback

 

Try playing a record to confirm that the belt is properly installed and the platter rotates smoothly.

 

If the belt slips off again, repeat the steps above to ensure correct positioning.

​

​

 

 

Step 8 — Reinstall the Retaining Clip

 

Once proper operation is confirmed, reinstall the retaining clip to secure the platter.

​

​

 

 

Important Notes

 

  • Belt displacement is a common occurrence in belt-drive turntables during shipping or extended use.

  • A misaligned belt may cause visible wobbling or incorrect rotation speed.

  • Proper belt alignment will restore normal operation.

​

 

 

Need Assistance?

 

If the turntable still does not rotate properly after completing these steps, please contact our support team and provide:

 

  • A short video showing the issue

  • Your order number

 

We will be happy to assist you further.

beltpostion.jpg
bottom of page