To replace the LED panel for the Taurus series jukebox, follow these steps:

1. First, make sure you have purchased the correct LED panel. You can buy replacement panels from the official website or other third-party vendors.

2. Disconnect the power cord of the jukebox, ensuring that it is completely turned off and not running.

3. Locate the LED panel. For the Taurus series jukebox, it is usually located at the top or bottom of the music selection area.

4. Use a screwdriver or other appropriate tool to remove the outer casing of the panel. You may need to undo several screws or clips.

5. Take off the old LED panel. It usually has one or more connectors that need to be handled carefully to avoid damage.

6. Install the new LED panel in the same location. Ensure that the connectors are fully inserted, and the panel is fixed in the correct position.

7. Reinstall the casing and tighten the screws or clips.

8. Connect the power cord of the jukebox, turn on the power, and test whether the new LED panel is working properly.
    

Note that replacing the LED panel may require some electronic skills and experience. If you are unsure about this, consult professionals or the technical support team.
Email: Support@arkrocket.com